Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-784004.png)
NOTE: In USA vehicles, the rubber hose -2- of the leak diagnosis pump is extremely tight. If the hose is pulled, the filler neck can break off at
the leak diagnosis pump.
8. Carefully remove the two electric plugs -3- on the carbon canister and on the leak diagnosis pump and the hose on the filler neck -2- of the leak
diagnosis pump (USA). There is always a risk of damage. Then, disconnect plastic line -1-.
9. Cut through the tie-wraps of the ground cable on the carbon canister and take the carbon canister out of the wheel well. Replace tie-wraps.
10. Remove hose connection on the degassing tank.
11. Pull filler neck and degassing tank out of the wheel well and secure with a piece of wire -arrow- (figure shows degassing tank with carbon
canister).
