Cayenne S (9PA) V8-4.5L (2003)
10. Connect the throttle positioner. The connector must engage audibly. Clip the connecting cable into the sheet metal support.
11. Press the 4 rubber elements in the cover onto the 4 ball socket holders. The fastening elements must lock in firmly.
12. Slide the design cover of the cylinder bank 1 - 4 under the secondary air pump as shown in the picture and then slide the cover of the second
ignition module through underneath the torque support bracket.
13. Press down the 2 rubber mounts on the support. The rubber mounts must engage firmly.