Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-817014.png)
14. Tighten the 4 fastening screws on the ignition coils to 4 - 5 Nm (3.0 - 3.5 ftlb.).
15. Reinstall secondary air pump. Tighten the 3 fastening screws to 10 Nm (7.5 ftlb.).
16. Reinstall torque support. Install the fastening screw (M10 x 70) with a new fastening nut on the bracket. Tightening torque 60 Nm (44 ftlb.).
17. Tighten torque support fastening screw on the body (M10 x 20) to 60 Nm (44 ftlb.).
18. Install engine compartment cover on the right side. To do this tighten the 4 bayonet screws and the sheet metal screw on the windshield washer
reservoir.
19. Slide design cover under the secondary air pump as shown in the picture.
