Cayenne S (9PA) V8-4.5L (2003)
6. Pull the ignition coil out and replace it.
7. Reconnect a new ignition coil. Tighten the fastening screws to 10 Nm (7.5 ftlb.).
8. Disconnect ignition coil. To do this slide on the connector until it locks with an audible click.
NOTE: A rag should be placed between the secondary air pump and the design cover to prevent the cover from being scratched.
9. Slide design cover under the secondary air pump as shown in the picture.
10. Then press down the 2 rubber mounts on the support. The rubber mounts must engage firmly.