Cayenne S (9PA) V8-4.5L (2003)
The following country-specific tuner settings can be 'coded':
-
Europe
-
North America
-
South America
-
Australia
-
Asia
-
South Africa
-
Japan
Data Transfer Fault
Data Transfer Fault
If faults are detected when the data is decoded, this is known as a data transfer fault. The faults can arise when the data is coded, when the data is
transferred through an input level that is optically too low or when the data is decoded. A fault entry is not recorded.
Display '*' In the Menu 'Control Modules' and Menu 'PCM2/ CDR23 MOST Component Check'
Display '*' In The Menu 'Control Modules' And Menu 'PCM2/ CDR23 MOST Component Check'.
Differing required/actual installed components list
When the 'automatic control module search' is complete, the following display ' *' appears in front of the control module description 'PCM2' in the
'Control modules' menu, as well as in the 'PCM2 MMI function selection' in front of the entry 'MOST required installed components list' if the Porsche
System Tester II No. 9588 establishes a difference between the required and actual installed components list and there is no fault code in one of the fault
memories of the MOST control modules.
If there is a fault code preent in one of the MOST control modules, the display '*' is only shown in the 'PCM2 MMI function selection' in front of the line
'MOST required installed components list'.
If there is a display in the menu Control module, an existing fault code has priority and a '#' is set.
Drive Links
Drive Links
Drive links of the PCM2 can be activated with this menu item. This allows the function of the drive links to be assessed very quickly.
The following drive links can be activated with the Porsche System Tester II No. 9588:
-
MOST bus switch
-
MOST power reduction
-
Output switch
-
Volume - minimum value
-
Volume - center position
-
Volume - maximum value
-
Front fader
-
Middle fader
-
Rear fader
-
Left balance
-
Central balance
-
Right balance
-
Bass - minimum value
-
Bass - center position
-
Bass - maximum value
-
Treble - minimum value
-
Treble - center position
-
Treble - maximum value
-
MOST switch
-
Mute
The subsequent note does not apply to the following:
-
MOST bus switch
-
MOST power reduction
NOTE: The activated drive link is automatically switched off after approximately 20 seconds.
External Amplifier