Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1244079.png)
5. Release the outer plug "2" "arrows C" and pull if off "arrow D".
6. Pull off the line with the clip from the water pipe "arrow".
7. Mark the exact installation position of the line in the clips with adhesive strips "A".
8. Open the clips "arrows B" and remove the line "arrow C".
9. Unscrew the clips "arrows" and remove them from the threaded pins.
Installing Wiring Harness For Auxiliary Heater
1. Connect the clips to the threaded pins "arrow".
