Cayenne S (9PA) V8-4.5L (2003)
NOTE: When replacing the wiring harness, transfer the position markings for the clips to the new wiring harness.
2. Insert the wiring harness in the clips "arrow A" and press in the clip only as far as the first catch "arrow B" - do not press hard.
3. Align the wiring harness on the clips to the adhesive tape markings "C" "arrows D" and press in the clips completely "arrow B".
4. Clip in the line on the water pipe "arrow".
5. Connect the plug "arrow A" until the locking tab "B" engages audibly.
6. Connect the outer plug "2" "arrow A" until the locking tabs engage audibly "arrows B".
7. Connect the inner plug "1" "arrow C" until the locking tab "arrow D" engages audibly.