Cayenne S (9PA) V8-4.5L (2003)
1. Install in reverse order.
2. Following this repair work, vehicle must be aligned!
^
The entire threaded parts of the axle must be tightened in vehicle position! Vehicle position means: vehicle standing on the wheels, or the
wheel suspension is being raised with a universal vehicle lift! -Dimension X-, from lower edge of wing to middle of axle 502 mm ± 10 mm
corresponds to vehicle position!
^
Use an intermediate layer (hard rubber)! Do not damage the brake cover plate!
^
Screws are Dacromet-coated and must not be greased!
^
Use new screws and fastening nuts!
^
Use correct tightening torques!