Cayenne S (9PA) V8-4.5L (2003)
4. Undo the two fastening screws to the left and right on the hydraulic mounts.
5. Undo the two fastening screws from the engine carrier to the body and remove the engine carrier.
Installing engine carrier
1. Install engine carrier. To do this, first position the fastening screws (M10 x 45) on the hydraulic mounts and tighten them. Tightening torque: 60
Nm (44 ft. lbs.)
2. Tighten the new fastening screws on the engine carrier. Tightening torque: 100 Nm (74 ft. lbs.) + 180°.
3. Install the suspension subframe.
4. Fit engine guard.