Cayenne S (9PA) V8-4.5L (2003)
Ride Height Sensor: Service and Repair
Removing and Installing Rear Level Sensor
Removing and installing rear level sensor
Note!
^
A level sensor is installed on each spring strut in running gears with level control.
^
The removal and installation on the right spring strut has been described.
^
The level sensor is screwed to the suspension subframe and top control arm.
Removing rear level sensor
1. Counter with an open-ended wrench on the two flats -1- and unscrew the fastening nut.
2. Unscrew both fastening screws -2-.
3. Press the electrical plug together -a- and pull it off.
Installing rear level sensor
1. Connect the electrical plug to the angle sensor until it engages audibly.