Cayenne S (9PA) V8-4.5L (2003)
^
The entire threaded parts of the axle must be tightened in vehicle position. Vehicle position means: vehicle standing on the wheels, or the wheel
suspension is being raised with a universal vehicle lift. Dimension -X-, from lower edge of wing to middle of axle 502 mm, ±10 mm corresponds
to vehicle position.
^
Use an intermediate layer (hard rubber)! Do not damage the brake cover plate.
^
Observe correct tightening torques.
1. Mount the halves of the stabilizer bearing in the correct position on the stabilizer. In the correct position means: The larger outer [diameter] is on
the wheel side.
2. Engage at the prescribed take-up points -arrow-.