Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1404003.png)
9. Carefully remove -spring strut- -arrow downwards.
Installation
Caution! When filling the air spring struts, the vehicle lifts.
Danger of injury and material damage if the wheel carrier is raised incorrectly.
^
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels). When raising, use a suitable
intermediate layer (hard rubber).
^
Do not damage the brake cover plate.
Note!
^
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels). When raising, use a suitable intermediate
layer (hard rubber).
^
Do not damage the brake cover plate.
^
Visually inspect all parts.
^
If a new spring strut is fitted, it must be prebilled to 3 bar in its original packaging.
^
Replace self-locking nuts.
^
Replace all expansion screws (screws which are fitted with torque angle tightening procedure).
^
The entire threaded parts of the axle must be tightened in vehicle position. Vehicle position means: vehicle standing on the wheels, or the wheel
suspension is raised using a universal vehicle lift. -Dimension X-, from lower edge of wing to middle of axle 506 mm ± 10 mm corresponds to
vehicle position.
1. Insert spring strut into vehicle.
