Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1430006.png)
13. Insert the tubular piston cylinder VAS 6178. Position the pressure piece T10205/3 and the nut for the threaded rod 8-2. Press out the wheel hub.
^
It should be ensured that the separator is not pressing on the seat of the bearing inner race on the wheel hub.
14. If the wheel hub is used again, remove the -inner race of the wheel bearing- from the wheel hub. To do this, position the 12 - 115 mm (diameter)
separator 111 behind the inner race.
15. Press inner race off the wheel hub. To do this, position the bell T10205/2 without the grip piece. Insert the tubular piston cylinder VAS 6178.
Position the pressure piece T10205/3 and the nut for the threaded rod 8-2.
16. Remove the -wheel speed sensor-.
