Cayenne S (9PA) V8-4.5L (2003)
Removal
^
The wheel bearing is removed with the wheel bearing housing installed.
1. Remove the corresponding hub cap with puller hook 9229/1 and release the axle nut (fastening nut) before lifting the vehicle. Operate the brake
whilst doing so (2 workers required).
2. Raise vehicle.
3. Remove the axle nut (fastening nut) and remove the drive shaft.
4. Release brake calliper and hang on a suitable position in the wheel well.
5. Remove -brake disc-.
6. Disengage the cable of the foot-operated parking brake and remove the brake shoes.
7. Remove wheel hub (tools).
8. Secure the grip piece (2 half shells) T10205/1 with several wheel bolts behind the wheel hub.