porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

A/T - Fluid Leak From The Torque Converter Area|Page 4390 > < A/T - Fluid Leak From The Torque Converter Area|Page 4388
Page 2
background image

955.300.011.GX -> Automatic transmission/Cayenne Turbo (Remanufactured Part)1 (2)

(1) Note allocation of transmission control unit required as specified in PET (Porsche Electronic Parts Catalogue).
(2) Remanufactured Parts must always be used in warranty and goodwill cases and for Porsche pre-owned vehicles under guarantee if these parts are

included in the exchange programme.

955.321.243.00 -> Shaft sealing ring/torque converter (for bushing version)
955.321.243.02 -> Shaft sealing ring/torque converter (for needle-roller bearing version)

References:

-

Workshop Manual '324719 Removing and installing torque converter sealing ring'

-

Workshop Manual '373519 Removing and installing transmission'

-

Technical Information, Group 3: 3735 - Tiptronic transmission repair work (No. 10/03).

-

Technical Information, Group 3: 3702 - Changed ATF filling capacity for new automatic transmissions (No. 1/04)

Disclaimer

Technical Service Bulletin # 37/03

Date: 071211

A/T - Fluid Leak From The Torque Converter Area

Cayenne (9PA)

7/03 ENU 3250

Dec 11, 2007

Tiptronic Transmission: Loss Of Transmission Oil In Area Of Torque Converter

INFORMATION:
This Technical Information replaces the TI dated December 18, 2003.
Changes compared to the previous Technical Information:
-

Part Nos. section: Remanufactured Part numbers specified.

-

References section:

-

Reference to Technical Information, Group 3: 3735 - Tiptronic transmission repair work updated (No. 10/03).

-

Reference to Technical Information, Group 3: 3702 - Changed ATF filling capacity for new automatic transmissions (No. 1/04) added.

Vehicle Type:

Cayenne S/Cayenne Turbo

Model Year:

As of 2003 up to 2006

Equipment:

6-speed Tiptronic transmission A48.00 (S) and A48.50 (Turbo)

Concerns:

Tiptronic transmission

INFORMATION:
Loss of transmission oil in area of torque converter.

The following procedure applies in the event of a loss of transmission oil at the shaft sealing ring of the Tiptronic transmission (area of the torque
converter):

For vehicles manufactured before the date of introduction specified below:

In the event of a loss of transmission oil in the area of the torque converter, the Tiptronic transmission must be removed together with the torque
converter and replaced with a Tiptronic transmission (supplied filled and equipped with torque converter) that has been modified in the area of the shaft

A/T - Fluid Leak From The Torque Converter Area|Page 4390 > < A/T - Fluid Leak From The Torque Converter Area|Page 4388