Cayenne S (9PA) V8-4.5L (2003)
Marking the clutch adjuster
2. Screw in new fastening screws on the clutch in the specified order -1 to 6- and in several steps. Tighten each screw by half a turn at a time.
Clutch pressure plate to dual-mass flywheel Initial tightening 20 Nm (15 ft lb.)
Clutch tightening sequence
Clutch pressure plate to dual-mass flywheel Final tightening 90 °
3. Remove special tool centering mandrel 3434.
Installing a new clutch
Caution
Danger of injury from releasing clutch set.
-
Due to preloading of the clutch set, parts of the coupling may fly out.
-->
Locking hook on new clutch set was removed prematurely.
-->
Secure clutch pressure plate. Then remove locking hook.