Cayenne S (9PA) V8-4.5L (2003)
Information
When installing the clutch plate, observe the correct installation position. Please note marking -arrow inset- on clutch plate.
Clutch plate marking
Information
The clutch pressure plate must be positioned on the three dowel pins --> Fitting clutch plate of the doublemass flywheel.
Fitting clutch plate
1. Position new clutch set on engine using special tool centering mandrel 3434 -arrow- .
Centering the coupling plate
Information
-
Replace clutch fastening screws.
2. Screw in new fastening screws on the clutch in the specified order -1 to 6- and in several steps. Tighten each screw by half a turn at a time.
Clutch pressure plate to dual-mass flywheel Initial tightening 20 Nm (15 ft lb.)