Cayenne S (9PA) V8-4.5L (2003)
Clutch tightening sequence
Clutch pressure plate to dual-mass flywheel Final tightening 90 °
Caution:
Danger of injury from releasing clutch set.
-
Due to preloading of the clutch set, parts of the coupling may fly out.
-->
Locking hook on new clutch set was removed prematurely.
-->
Secure clutch pressure plate. Then remove locking hook.
3. Unscrew locking hook with special tool 2-hole nut turner 3212 in an anti-clockwise direction -arrow- and remove it.
Removing locking hooks
4. Remove special tool centering mandrel 3434.
Subsequent work for clutch
1. Install manual transmission. --> Refer to Removing and installing transmission