Cayenne S (9PA) V8-4.5L (2003)
Subsequent work
1. Fit fuse box and clip in the six connectors. -arrow-
2. Fit left plenum panel partition, ensuring correct seating of gaskets and correct routing of wiring harness.
3. Fit cowl panel cover.
4. Install engine design cover.
5. Bleed the clutch.
6. Connect the battery.
Information
If clutch switches 22-23 on the mounting saddle for clutch pedal 21 have been removed, they must be replaced. Afterwards check operation of new
clutch switches.
Check operation of both clutch switches -22-23- (see below: first switch (clutch pedal switch), second switch (interlock).
Overview of pedals excluding stop light switch
1 -
Seal
2 -
Hexagon nut
3 -
Mounting saddle
4 -
Pin
5 -
Hexagon nut
6 -
Hexagon-head bolt
7 -
Seal
8 -
Fixing clip/screw
9 -
Master cylinder
10 -
Mounting
11 -
Bolt
12 -
Clutch pedal
13 -
Cap
14 -
Lock (mechanical)
15 -
Clutch power spring
16 -
Bearing shell
17 -
Rubber stop