Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-997001.png)
Axle Shaft Assembly: Service and Repair
Front Suspension
Removing and installing front drive shaft
Removing
Caution! Danger of injury and material damage if the wheel carrier is raised incorrectly!
^
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels)!
^
When raising, use a suitable intermediate layer (hard rubber)!
^
Do not damage the brake cover plate!
^
Vehicle may not be moved if drive shafts have not been fitted and tightened!
^
Before raising the vehicle, undo the drive shaft fastening at the wheel side! Operate the brake whilst doing so (2 workers required)!
1. Remove front wheel and underside panel.
2. Release fastening nut for drive shaft.
