Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-2001004.png)
-
Before the wiper motor is attached to the wiper link, connect the wiper motor to the electrical plug connection, close the bonnet, activate the flick
wiping function at least once and let it run to the limit position. Disconnect plug connection again.
-
The wiper motor must be operated again at least once with a flick wiping action and allowed to run to the limit position before the wiper arms are
attached. Close the bonnet.
-
Observe the sequence of fastening screws "8". See procedure no. 3 in the following figure.
