Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
6. Release support -Arrow C- , open it -Arrow D- and remove ground strap -Arrow E-.
7. Press out rubber sleeve -Arrow A- and remove line to pneumatic spring housing.
8. Pull wiring harness inside -Arrows B-. As space is limited, push the connectors individually past the rear lid hinge.
Removing Wiring Harness, Right Side Of Tailgate To Lid Hinge
1. Release connector on rear lid lock -Arrows A- and remove it -Arrow B-.
2. Release connector on contact switch -Arrows C- and remove it -Arrow D-.