Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-1007005.png)
3. Unclip wiring harness -Arrows A-.
4. Press out clips inwards -Arrows B-.
5. Remove rubber sleeve on window frame -Arrow A-.
6. Unclip wiring harness on window frame -Arrows B- and remove it.
7. Remove wiring duct from hinge -Arrow A-.
8. Open wiring duct -Arrows B- , remove cover -Arrow C- and take out wiring harness.
Removing Wiring Harness, Right Side Of Vehicle To Lid Hinge
INFORMATION:
-
The styrofoam element is glued in.
-
Carefully release styrofoam element.
-
Replace damaged styrofoam elements.
