Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
6. Clip in wiring harness -arrows-.
7. Tighten ground strap and torsion protection -a- to ground pin with fastening nut -Arrow 1-. - Tightening torque: 6.5 ftlb.
8. Push connector onto rear window wiper -Arrow A- until locking tabs are felt to engage.
9. Push connector onto lock lower part for rear window -Arrow C- until locking tabs -Arrows B- are felt to engage.
10. Push plug connection for contact switch together -Arrows D- until locking tab -Arrow E- is felt to engage.
11. Insert plug connection into support -Arrow F- and turn it until it is felt to engage in the clip -Arrow G-.
Installing Wiring Harness, Right Side Of Vehicle To Lid Hinge