Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
1. Push wiring harness through to the rear from the inside -Arrow A-.
INFORMATION: The lead must run over the pneumatic spring.
2. Pull socket through pneumatic spring housing -Arrow B- until rubber sleeve is felt to engage -Arrow C-.
3. Push blue socket into socket support -Arrow A- until locking tabs -Arrows B- are felt to engage.
4. Press in support for socket -Arrow A- until locking tabs -Arrows B- are felt to engage.
5. Insert blue connector -Arrow C- until the locking tabs -Arrows D- are felt to engage.