Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
1. Remove dashboard moulding on driver's side. Refer to Removing and installing dashboard moulding.
2. Remove cover under dashboard on driver's side. Refer to Removing and installing cover under dashboard.
3. Remove ignition key.
4. Remove fuse box cover.
4.1. Unclip fuse box cover -1- using a plastic wedge on the retaining clips -2- and swivel it outwards -arrow A-.
4.2. Remove the fuse box cover -1- to the rear -arrow B-.
5. Remove trim panel under dashboard on the driver's side.
5.1. Unscrew the fastening screws -3- and swivel the trim panel under the dashboard on the driver's side -4- downwards -arrow C-. Pull out the
trim panel under the dashboard on the driver's side -4- over the guide -5- ( -arrow D- ).