Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
6. Disconnect the plug connections.
6.1. Release -6 and 7- and pull off -arrows E- plug.
7. Unclip the bowden cable for the parking brake release.
7.1. Using a screwdriver, carefully unclip the sleeve -8- and ball joint -9- of the Bowden cable upwards out of the release lever -10- ( -arrow- ).
8. Take off the trim panel under the dashboard on the driver's side.
8.1. Pull the trim panel under the dashboard on the driver's side -4- out of the guides -11- ( -arrow F- ) and take it out towards the rear.
Removing the cover under the instrument panel on the passenger's side