Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-625011.png)
12. Pull the sleeve of the cable -arrow- as far as possible out of the wheel bearing housing.
13. Push the cable gently into the brake drum. Use a small screwdriver inserted through the brake disc opening to press the retaining spring and
hexagon on the expander lever upwards and at the same time pull the brake cable out of the brake drum.
Installing rear brake cable
Information
On vehicles whose cables are still good but stretched, the -3- ring grooves of the circlip can be used as compensation.
