Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Thermostat housing
1
- Thermostat housing
2
- Screw, M6 x 25 - Tightening torque: 10 Nm (7.5 ftlb.)
3
- Screw, M6 x 25; screwed to fuel high-pressure distribution pipe
4
- Seal for thermostat housing; replace
5
- Thermostat
6
- Intake socket/transfer pipe with two sealing rings
Water pump and thermostat insert
1
- Coolant pump and screws
2
- Coolant pump pulley and screws
3
- Thermostat (coolant regulator)
4
- Intake socket/transfer pipe with two sealing rings
5
- Puller hook Assembly tool T10118
6
- Commercially available internal puller (46 to 56 mm) Internal puller Nr.108 Pos.6
Removing coolant regulator
1. With engine installed: Remove thermostat insert using shop-made tool.
1.1.
Use pointed-nose pliers to wrap a piece of wire or electric cable through the transfer pipe and around two opposite brass spokes of the
thermostat insert.