Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
fitted in the thermostat housing -1-.
Thermostat housing
1
- Thermostat housing
2
- Screw, M6 x 25
3
- Screw, M6 x 25; screwed to fuel high-pressure distribution pipe
4
- Seal for thermostat housing; replace
5
- Thermostat
6
- Intake socket
A - Direction of travel
Coolant guide
1
- Coolant pipe with sealing ring
2
- Coolant sensor
3
- Screw, M6 x 16
4
- Screw, M6 x 12 (currently not installed)
5
- Holding clamp (currently not installed)
6
- Sealing ring
7
- Screw plug, M16 x 1.5
8
- Screw, M6 x 25
9
- Collection pipe
10
- Distributor pipe seal
11
- Cap
A - Direction of travel
6. Remove the two coolant hoses from the coolant pipe behind the cable duct (figure shows several coolant hoses). Remove thermostat housing with
coolant pipe.