Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Coolant hoses
5. Insert thermostat housing with coolant pipe and secure according to tightening sequence.
Tightening sequence for thermostat housing
6. Screw coolant pipe onto collection pipe.
Coolant guide
1
- Coolant pipe with sealing ring
2
- Coolant sensor - Tightening torque: 30 Nm (22 ftlb.)
3
- Screw, M6 x 16 - Tightening torque: 12 Nm (9 ftlb.)
4
- Screw, M6 x 12 (currently not installed)
5
- Holding clamp (currently not installed)
6
- Sealing ring
7
- Screw plug, M16 x 1.5 - Tightening torque: 30 Nm (22 ftlb.)
8
- Screw, M6 x 25 - Tightening torque: 12 Nm (9 ftlb.)
9
- Collection pipe
10
- Distributor pipe seal
11
- Cap
A - Direction of travel
7. Replace sealing rings on vent line and fit vent line on the cylinder heads.