Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Vent line
Wire harness for engine
8. Secure wiring harness.
9. Insert coolant pipe with new sealing ring and screw it on. -1-
Coolant return line
1
- Coolant pipe
2
- Coolant hose
3
- Holder
4
- Screw, M6 x 12 - Tightening torque: 10 Nm (7.5 ftlb.)
5
- Screw, M6 x 20 - Tightening torque: 10 Nm (7.5 ftlb.)
6
- Connect tab on oil/coolant heat exchanger
B - Clip on to support bracket
A - Direction of travel
10. Fit front coolant hoses at the thermostat housing.