Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Notice
Incorrect handling of pulley
Risk of damage to pulley
-
The pulley is sensitive to impact. Do not pry off the pulley with a screwdriver.
-
Do not re-use a damaged pulley.
3. Unscrew the three loosened fastening screws on the pulley and remove the pulley.
Belt pulley
4. Unscrew the fastening screws -3- on the coolant pump and remove the pump.
Coolant pump mounting
Coolant pump
1
- Coolant pump
2
- Seal; rubber seal fitted in coolant pump
3
- Screw, M6 x 25 - Tightening torque: 10 Nm (7.5 ftlb.)
A - Direction of travel