Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Remove coolant pump.
5. If the pump is stuck, loosen it by gently tapping with a plastic hammer.
Loosening coolant pump with a plastic hammer
Installing coolant pump
1. Clean sealing faces. Fit coolant pump with new seal.
Coolant pump
1
- Coolant pump
2
- Seal
3
- Screw, M6 x 25 - For tightening sequence, see below - Tightening torque: 10 Nm (7.5 ftlb.)
A - Direction of travel
2. Tighten fastening screws.