Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Oil pressure control valve and tool
1
- Screw, M6 x 20
2
- Joint flange with sealing ring
3
- Cap screw, M36
4
- Oil sealing ring with engine oil
5
- Solenoid valve/oil pressure control valve
6
- Special socket socket-wrench insert 9753
7
- Puller relay puller 9235
Removing oil pressure control valve (solenoid valve) on 4.8-liter DFI engines
Information
The oil pressure control valve is fitted in the oil guide housing under the generator between the engine carrier -1- and oil filter -2-.
Installation position of oil pressure control valve
1. Carefully grip the cable plug on the oil pressure control valve with a pointed-nose pliers and release it. Pull off cable plug.
2. Expose cable and set it aside. -cable-
Cable in front of oil pressure control valve