Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. Remove screws on joint flange. -1-
Levering off joint flange
4. Carefully lever off the joint flange with a screwdriver. Overcome the resistance of the two sealing rings on the oil pressure control valve while
doing this.
5. Fit special socket socket-wrench insert 9753 on a ratchet through the opening in the oil guide housing and loosen cap screw on oil pressure control
valve.
Using special socket
6. Grip oil pressure control valve with a relay puller 9235 and turn carefully to remove it.
Removing/fitting oil pressure control valve
Installing oil pressure control valve (solenoid valve) on 4.8-liter DFI engines