Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
2. Push guide tube into the oil guide housing. Fit and tighten screws. -3 and 11-
Oil guide housing with accessories
1
- Guide tube
2
- O-ring
3
- Screw, M6 x 16 - Tightening torque: 10 Nm (7.5 ftlb.)
4
- Oil dipstick
5
- O-ring
6
- Screw, M6 x 25; timing-case cover to oil guide housing; oil-level sensor to oil guide housing; oil guide housing to lower part of crankcase
7
- Oil-level sensor
8
- O-ring
9
- Joint flange
10
- Screw, M6 x 20
11
- Screw, M6 x 16 - Tightening torque: 10 Nm (7.5 ftlb.)
A - Direction of travel
Subsequent work
1. Install intake pipes upstream of the throttle valve.