Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Oil/coolant heat exchanger (oil cooler)
1
- Oil guide housing
2
- Oil-filter housing - Tightening torque: 25 Nm (19 ftlb.);
3
- Oil filter
4
- Oil-filter sealing ring
5
- Oil duct adapter (cannot be replaced)
6
- Heat exchanger seal
7
- Oil/coolant heat exchanger
8
- Screw, M6 x 20; self-tapping screws ex-works; metric screws can also be used - Tightening torque: 10 Nm (7.5 ftlb.);
A - Direction of travel
Removing oil/coolant heat exchanger (oil cooler)
1. On vehicles with PDCC, loosen the hoses on the oil guide housing.
1.1.
Remove two nuts. -arrows-
PDCC lines
1.2.
Unclip line under the air conditioning compressor -arrow-. Lift the lines aside.
Unclipping PDCC line