Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
7. Unclip rear tank vent line at the wire harness. -arrow-
8. Loosen screws on intake-air distributor. Illustration shows tightening sequence - Tightening sequence for intake-air distributor (shown on naturally
aspirated engine) applies to both naturally aspirated and turbo engines. Carefully bend line for tank ventilation out of the way in order to access the
screws.
9. Pull off vacuum line. -Vacuum line-
10. Lift off intake-air distributor.
Installing intake-air distributor