Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Measuring the setback distance
4. Align the timing-case covers by tapping lightly with a rubber hammer.
Aligning timing-case cover
5. Once you have aligned the timing-case cover, tighten two fastening screws on the left and right of the timing-case cover base hand-tight. Then
check the position of the timing-case cover again using the dial gauge.
Checking position
Securing timing-case cover
Securing timing-case cover up to October 2008
1. Tighten the remaining fastening screws to the appropriate torque in the order shown.