Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. Insert fuel line in the wheel housing into the fuel hose -Arrow A- and fasten with a new hose clamp -Arrow B-.
4. Push fuel line with fuel hose onto the fuel pump -Arrow C- and fasten with a new hose clamp -Arrow B-.
5. Press fuel line into holder -Arrow A-.
6. Close holder -Arrow B- until locking tabs are felt to engage -C-.
7. Install the cover and screw down using fastening screws -Arrow 1- and fastening nuts -Arrows 2-. - Tightening torque: 1.5 ftlb. - Tightening
torque: 3.5 ftlb.
Installing fuel line - fuel pump to tank
INFORMATION: The direction of travel is shown by an arrow with the designation "x"
1. Push the line through forwards -Arrow A- , connect to the fuel pump -Arrow B- and fasten with a new hose clamp -C-.
2. Press line into holder and close the holder -Arrow D- until the locking tab can be felt to engage.
3. Push the line through up along the tank -Arrow E- and press into holder -Arrow F- until it can be felt to engage.