porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

ABOUT US
Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4846 > < Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4844

Cayenne Turbo (9PA) V8-4.8L Turbo (2008)

Page 5
background image

4. Push line onto tank connection -Arrow A- until retaining clip -Arrow B- is felt to engage.
5. Press fuel line into the holder -Arrow C- until it is felt to engage.

6. Install cover -Arrow A- and screw down with the fastening nuts -Arrows 6-. - Tightening torque: 6.5 ftlb.
7. Fold back floor carpeting -Arrow B-.
8. Install bracket with seat-belt buckle -Arrow C- and and screw down using fastening screws -5-. - Tightening torque: 37 ftlb.

9. Fold back rear seat -Arrow A- , press front edge downwards -Arrow B- and push to rear -Arrow C-.

10. Press fuel tank upward -arrow- and tighten the fastening screws -Arrows 4-. - Tightening torque: 24 ftlb.

Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4846 > < Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4844