Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. Release spring band clamp using assembly pliers for spring band clamps, Cayenne hose connections NR.72-1 -a- ( -arrows A- ) and slide it off the
adapter -arrow B-.
4. Pull down the moulded hose from the housing -arrow C-.
5. Release the hose clamp -b- and pull out the fuel line from the housing -arrow A-.
6. Unclip the fuel line -arrows B-.
7. Release spring band clamp using assembly pliers for spring band clamps, Cayenne hose connections NR.72-1 -a- ( -arrows C- ) and slide it off the
adapter -arrow D-.
8. Unscrew fastening screws -arrows 3-.
9. Pull the housing out of the inner hose -2- and remove it to the front.
10. Release the inner connector -1- ( -arrow A- ) and pull it off -arrow B-.
11. Release the outer connector -2- ( -arrows C- ) and pull it off -arrow D-.
Installing Housing With Heat Exchanger