Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
4. Lever out fastening clip with a suitable screwdriver -arrow A- and remove the clip and the door contact switch -arrow B-.
Installing door contact switch
1. Install door contact switch in the locking bores -arrow A- and fasten it to the door lock with the fastening clip -arrow B-.
2. Press plug into the holder -arrow A- until it clicks into place.
3. Insert electrical wire -arrow B- and lay it in the guide -arrow C-.
4. Insert the holder and plug into the door lock -arrow- and tighten with the fastening screw -1-.
Subsequent work
1. Install door lock.