Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Fog/Driving Lamp Bulb: Service and Repair
Removing And Installing Bulb For Fog Light
Preliminary work
1. Release wheel housing liner in the front area.
Removing bulb for fog light
WARNING:
Risk of short circuit.
-
Before removing bulb, remove ignition key and switch off light switch.
1. Release connector -1- ( -arrow A- ) and pull off from fog light -2- ( -arrow B- ).
2. Turn bulb for fog light -1- anti-clockwise ( -arrow A- ) and remove from the fog light -2- ( -arrow B- ).
Installing bulb for fog light
1. Insert bulb for fog light -1- into the fog light -2- ( -arrow A- ) and turn clockwise ( -arrow B- ) until the bulb for fog light -1- engages securely.