Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3.4. Install tail light.
4. Check gap dimension.
4.1. Check gap dimension, maintaining the specified dimension of 3 ± 0.5 mm.
4.2. If necessary, remove tail light again, re-position lamp bracket or alter with adjusting shims.
Replacing bulb
INFORMATION: Observe the installation instructions and bulb table.
1. Remove the rear light.
2. Unscrew fastening screws -1- and fold over contact plate -2- in -direction of arrow-.
3. Press damaged bulb into holder, turn and remove it.
4. Insert new bulb, press into holder and turn it. Check that bulb is seated correctly.