Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
INFORMATION:
-
The repair instructions document "Removing and installing main wire harness" is divided into several chapters because of its size.
-
For body repairs, refer to the specific chapters on installing and removing individual sections of wiring.
Installing Main Wiring Harness - Engine Compartment On Right
Install main wire harness - dashboard area & centre console.
1. Push line through from passenger compartment to engine compartment -Arrow A- until rubber sleeve is felt to engage in firewall -B-.
2. Place line in installation position -Arrow C- and close clips -Arrow D-.
3. Push connector onto hydraulic unit -Arrow E- and press in the lock -Arrow F- until it is felt to engage.
4. Clip in line -arrow-.
5. Press line into rubber sleeve -Arrow A-.
6. Place line with rubber sleeve in installation position -Arrow B-.
7. Place line in installation position -Arrow C- and close clip -Arrow D- until locking tabs are felt to engage.