Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-694058.png)
45. Press out rubber sleeve (under rear seat) -arrow- and remove line upwards.
46. Remove airbag sensor on rear wheel housing.
47. Remove wiring duct (lower C-pillar) from threaded bolt and wheel housing seam -arrows-.
Only For Vehicles With Electric Adjustment Fitting
48. Press down protective cover (B-pillar) on connector -Arrow A- and maintain in this position.
49. Release connector -Arrow B- and pull off -Arrow C-.
50. Unscrew fastening nut -1- and remove ground straps together with twist lock -a- -Arrow D-.
51. Cut tie-wrap -a- (B-pillar).
52. Unclip cover at the top -Arrow A- and remove -Arrow B-.
A- & B-pillar
