Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
53. Release wire sleeve with a small screwdriver -Arrows A- and press away to the rear -Arrow B-.
54. Release connector for door wire harness -Arrows C- and pull off -Arrow D- connector.
A- & B-pillar
55. Release socket bracket -Arrows A- and remove -Arrow B-.
56. Release sockets -Arrows C- and pull out to the rear -Arrows D-.
57. Unclip line -arrows- (lower B-pillar).
58. Remove connector from airbag sensor at B-pillar.
59. Remove wiring duct (rear door floor area) from threaded bolts -arrows-.
60. Undo fastening nut -2- (central electrical system power distributor) and remove the line -Arrow A-.