Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-30006.png)
13. Insert fuse carrier -Arrow A- until locking tabs -B- are felt to engage.
14. Place lines in installation position -Arrows C- and fasten using new tie-wraps -D-.
15. Place relay carrier in installation position and press in -Arrow A- until locking tabs -B- are felt to engage.
16. Push connector onto air flow sensor -Arrow A- until locking tab -B- is felt to engage.
17. Place charge relay on threaded bolts -Arrow A- and tighten using new fastening nuts -7-. - Tightening torque: 3.5 ftlb.
18. Place contact bridges on threaded bolts -Arrows B- and tighten using new fastening nuts -6-. - Tightening torque: 6 ftlb.
19. Place fuse element on threaded bolts -Arrow C- and tighten using new fastening nuts. -4-. - Tightening torque: 15 ftlb.
20. Place fuse element on threaded bolts -Arrow D- and tighten using new fastening nuts. -5-. - Tightening torque: 3.5 ftlb.
21. Push in cover of power distributor from front to back -Arrow A- and press on -Arrow B- until the latch engages.
